Proxel - Electromagnetic Parking Sensor, Front + Rear with Wireless Display, Without Drilling the Bumper, Universal and Original

Front and Rear Electromagnetic Parking sensors Invisible without holes on the bumper During parking maneuvers, the EPS-DUAL 4.0 with Display wireless indicates the approach of the obstacle with three different warnings: pre-alarm zone (green led) followed alarm zone (yellow led) and finally risk of contact (red led). The EPS-FRONT 4.0 instead informs the driver first with a slow sequence of acoustic signals (pre-alarm zone) followed by a series of fast beeps (alarm zone) and finally with a continuous sound (risk of contact). It has the possibility to adjust the sensitivity. Thanks to the electromagnetic field technology, the reverse maneuver remains under the control of the driver up to the last centimeters before contact and therefore allows you to park in very tight spaces. - Flexible aluminum antenna sensor - Easy installation, no hole on the bumper and completely invisible from the outside. - It signals any type of obstacle and protects the entire length of the bumper. - Direct manufacturer assistance Display Wireless for the Rear kit 1) The first two green LEDs inform the driver that an obstacle is approaching. 2) Intermittent sound at a frequency of increasing repetition rate simultaneously with 3 LED color yellow and the word AL (ALARM) in the center of the display when the obstacle comes close to the bumper at a distance between 15 and 30 cm. 3) Switching on of the first red led, followed by the second one with a continuous sound, simultaneously to the word St (STOP) when an obstacle is very close to the bumper (10-15 cm). - Wireless connection with the central unit - Display with integrated speaker - Can be placed on the dashboard - Colour: black - on-off sound switch Universal and customizable - Adjustable sensitivity. With the EPS parking sensors it is possible to choose between four different settings, this to facilitate installation on most cars and allow the user to choose the sensitivity according to their liking. The antenna sensor - The antenna sensor is a self-adhesive aluminum tape 1 cm high 3.5 meters long and only a few tenths of a thickness. - With the antenna sensor of this length it is possible to install the EPS parking sensors also on very long and enveloping bumpers as in the case of caravans and campers. Data cable - Thanks to an important innovation that no other parking sensor possesses, the CONTROL UNIT / SENSOR connection is made with a special cable that enable operation without external disturbances. Antenna sensor - Unlike the classic "button" sensors, our electromagnetic parking sensors use a single sensor that is applied inside the bumper. - The antenna sensor can be folded and curved to follow the shapes of the bumper - Once applied from one end of the bumper to the other, the excess can be cut away. - High-strength adhesive tape, waterproof, thermal range -40 / +150 ° C Main future - 70 / 80 cm signal, up to a few centimetres - Signals any kind of obstacle and protects the entire length of the bumper - Flexible aluminium antenna sensor 3 m long and can be shortened - Easy installation, no holes on the bumper and completely invisible from the outside - New software and new tones, with sensitivity adjustment; choose from 4 different calibrations - Easy activation for the front version, having a push button with ring led - Wireless display with multi-coloured LED bar - 3-year warranty

• 70 / 80 cm signal, up to a few centimetres
• Signals any kind of obstacle and protects the entire length of the bumper
• Flexible aluminium antenna sensor 3 m long and can be shortened
• Easy installation, no holes on the bumper and completely invisible from the outside
• New software and new tones, with sensitivity adjustment; choose from 4 different calibrations